Aluminium alloy 5754 offers excellent corrosion resistance, particularly to seawater and industrially polluted atmospheres. It provides higher strength than alloy 5251, making it highly suitable for flooring, marine, and heavy-duty structural applications. The H24 temper delivers an optimal balance of strength, formability, and durability, making it ideal for applications requiring improved mechanical performance while retaining good workability. Note: Mechanical properties listed below apply to the H24 temper.
Alloy 5754 is typically used in:
Alloy 5754
Spec: BS EN 573-3:2009
| Chemical Element | % Present |
|---|---|
| Magnesium (Mg) | 2.60 – 3.60 |
| Manganese (Mn) | 0.00 – 0.50 |
| Chromium (Cr) | 0.00 – 0.30 |
| Iron (Fe) | 0.00 – 0.40 |
| Silicon (Si) | 0.00 – 0.40 |
| Copper (Cu) | 0.00 – 0.10 |
| Zinc (Zn) | 0.00 – 0.20 |
| Aluminium (Al) | Balance |
| Other (Each) | 0.00 – 0.05 |
| Others (Total) | 0.00 – 0.15 |
| Property | Value |
|---|---|
| Density | 2.66 g/cm³ |
| Melting Point | 600 °C |
| Thermal Expansion | 24 × 10⁻⁶ /K |
| Modulus of Elasticity | 68 GPa |
| Thermal Conductivity | 147 W/m·K |
| Electrical Resistivity | 0.049 × 10⁻⁶ Ω·m |
Spec: BS EN 485-2:2008
| Property | Value |
|---|---|
| Proof Stress | ≥ 160 MPa |
| Tensile Strength | 240 – 280 MPa |
| Elongation (A50 mm) | ≥ 6 % |
| Hardness (Brinell) | 70 HB |
Alloy 5754 also corresponds to the following standard designations and specifications, though these may not be direct equivalents:
The most common tempers for aluminium alloy 5754 are listed below. H114 and H111 are the most commonly used for treadplate applications:
Alloy 5754 is typically supplied in the following forms:
